Freelander TD4 Turbo Solenoid Fitting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Skibzee

Member
Posts
19
Location
Gloucestershire
I've had my 03 TD4 Freelander for 4 months now and have so far fixed the horn, thermostat, lights, drive shafts, speakers, windows and now i'm on my Final thing. My car stops accelerating up hills and at 70 MPH.
So, from my reading, i checked the turbo solenoid and there isn't one. The pipes have been joined with a T-piece and the connector cut off.
I now have a solenoid, but wanted to confirm@
1) Which pipe goes onto which of the 3 ports?
2) The connector was cut off of the wires which plug into the solenoid valve. I have a connector which fits, but am not sure which way the 2 wires go into the connector?
 
Welcome to the forum
wave.gif


Ask ter technical question over int Freelander section int link below. This section is fer introductions only and dun't get much traffic.

https://www.landyzone.co.uk/forum/land-rover-freelander.9/
 
Back
Top