pipkinbythesea
New Member
- Posts
- 6
- Location
- brighton
What does any one think about fitting a kenlow kit so the e.c.u does not control the fans but a stat from kenlow does ?? its about £35.00 
freelander fans??
- Thread starter pipkinbythesea
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
why not just switch the existing fans either from ecu or a stat?
Skynet
Well-Known Member
- Posts
- 1,197
- Location
- Melksham, Wiltshire
WTF???
I thought the only reason a Kenlowe was fitted was to get away from the 'drag' of the vicous belt driven fan by fitting an electric one!
Seriously, why bother???
I thought the only reason a Kenlowe was fitted was to get away from the 'drag' of the vicous belt driven fan by fitting an electric one!
Seriously, why bother???
- Posts
- 83,296
- Location
- Embasinga stocæ
or to be able to turn it/them off.
juiceyv8
New Member
- Posts
- 4,738
- Location
- bordon hants
Just let the ****er overheat and buy a real landy.
howardo
New Member
- Posts
- 6,783
- Location
- In the woods
juiceyv8
New Member
- Posts
- 4,738
- Location
- bordon hants
dont cry.
Skynet
Well-Known Member
- Posts
- 1,197
- Location
- Melksham, Wiltshire
He wants to turn off a piece of kit designed to cool the engine? They only operate when needed and the run-on when parked up doesnt last that long.
Sorry I don't see the reason to spend £35 in this case....
pipkinbythesea
New Member
- Posts
- 6
- Location
- brighton
sorry dont see the need for bad words here juicetv 8 ,i did look at lots off land rovers before i got my freelander a did not like what i saw most were rusted very bad on hte freelanders i saw hardly any rust what so ever !! happy chap !
- Posts
- 83,296
- Location
- Embasinga stocæ
As its a 1.8 there are a lot more important things to spend yo money on - a EWP and controller to start with.
chromiumuk
Well-Known Member
- Posts
- 2,203
- Location
- Earth
pipkinbythesea
New Member
- Posts
- 6
- Location
- brighton
Thanks all postive help recived with thanks regards neil
dazjam
Active Member
- Posts
- 503
- Location
- Burry Port
:blabla::blabla::blabla::blabla::blabla:
Seasider80
New Member
- Posts
- 29
- Location
- East Sussex
What is an EWP and a controller ?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
a waste of time and money
- Posts
- 83,296
- Location
- Embasinga stocæ
Do what James says. He knows ( or thinks he knows) everything about anything.
Last edited:
something that could work if you have a degree in mechanical engineering and a masters in fluid dynamics.
or you could always do what i did, fit all the available mods and check it regularly.
works for me
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Anyone mentions EWP again!!!!!!!!!!!!!
I'll set the dog on you
I'll set the dog on you
