Moorlander 28
New Member
- Posts
- 4
- Location
- Staffordshire moorlands
Hi to everyone.totally newbie to this site so go easy.
Anyway,purchased 10 plate fr2 hse two weeks ago.
Day one parks up,press fob and lock it.approx 3 hours later alarm goes off and realise drivers door actuator not working.
My mechanic strips down door and replaces with new part.
Same week exactly same scenario,locks car,3 hours later alarm goes off and again n/s/r actuator fails.
Mechanic again replaces with new actuator.
Same week exactly same problem,alarm goes off after 3 hours, door 3 o/s/r actuator failed.
Now car back at trader i purchased from to try and resolve issue.
Is this a complete coincidence or something going on with electrics.
Plugged a cheap obd reader in and codes are p1259 immobiler to pcm communication error and p068b pcm/ecm power relay de-energised.
Anyone got any ideas please
Anyway,purchased 10 plate fr2 hse two weeks ago.
Day one parks up,press fob and lock it.approx 3 hours later alarm goes off and realise drivers door actuator not working.
My mechanic strips down door and replaces with new part.
Same week exactly same scenario,locks car,3 hours later alarm goes off and again n/s/r actuator fails.
Mechanic again replaces with new actuator.
Same week exactly same problem,alarm goes off after 3 hours, door 3 o/s/r actuator failed.
Now car back at trader i purchased from to try and resolve issue.
Is this a complete coincidence or something going on with electrics.
Plugged a cheap obd reader in and codes are p1259 immobiler to pcm communication error and p068b pcm/ecm power relay de-energised.
Anyone got any ideas please
