Free Range Rover P38 Workshop Manual Rave

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nope it didn't, but it is the workshop manual.

I typed in Range Rover p38 workshop manual on google and found it.
 
Hi - I have an HSE 4.6 Autobiography R plate - and cannot find any manuals - your links come up blank, with Internet Explorer "cannot display this page to Error 404" There is no Haynes Manual either - so I'm stuffed. BTW how the heck do you get the rear bumper off to fit a tow bar? Any ideas buddys. John
 
Free stuff is always great.

But for £4.99 that I paid on eBay, the manual came in a day or so on a nice CD.

Invaluable and a bargain at £4.99
 
RAVE error - I cant seem to start a new thread (despite over 50 posts)- hence posting this here.

The workshop manual seems to contain an error in relation to the wiring for the ABS / ETC on post 99 vehicles.

Ive checked the downloaded version and the online version at

Land Rover Workshop Manuals > Range Rover P38 > 70 - BRAKES - ABS > DESCRIPTION AND OPERATION > ANTI-LOCK BRAKE SYSTEM - DESCRIPTION > Page 990

If you read the wiring for the 9 pin block C0505 It shows that Pins 1 & 2 should be wired to the front left sensor (my vehicle FL sensor is wired to pins 7&8)

The diagram also shows that pin 3 is not connected - yet the text says pin 3 goes to the right rear wheel sensor.

Any ideas? Is there an addendum to show the known errors?
 
RAVE error - I cant seem to start a new thread (despite over 50 posts)- hence posting this here.

The workshop manual seems to contain an error in relation to the wiring for the ABS / ETC on post 99 vehicles.

Ive checked the downloaded version and the online version at

Land Rover Workshop Manuals > Range Rover P38 > 70 - BRAKES - ABS > DESCRIPTION AND OPERATION > ANTI-LOCK BRAKE SYSTEM - DESCRIPTION > Page 990

If you read the wiring for the 9 pin block C0505 It shows that Pins 1 & 2 should be wired to the front left sensor (my vehicle FL sensor is wired to pins 7&8)

The diagram also shows that pin 3 is not connected - yet the text says pin 3 goes to the right rear wheel sensor.

Any ideas? Is there an addendum to show the known errors?
There are, sadly, many errors in RAVE:( You just have to use your common sense.:)
 
Back
Top