fog/spot pods

Ok, im a bit confused on this subject, ive been over a few threads on here about this but just need a bit more info.

I'm looking for the front fog and spot light pods for my freelander, its a late (December) 2000 x ref pre face lift td4.

I'm after the double cluster. But am unsure of whats the correct part number, as some only fit the v6 or the face lift or ones with the nudge bar, I've found the correct nudge bar I need ( part number stc50413, correct me if im wrong) but i cant find the correct pods for my bumper, can anyone help?

Are these the ones you're looking for?

Land Rover Accessories Online Catalogue | Lamp Pod - Double

yes thats them, i found some of the same on ebay, but with a bit of work they can be fitted to the td4/1.8 bumper as its a different bumper to the v6, or is there another pod kid avaliable for non v6 and non facelift models?

the catalogue only shows double pod for V6 models, none of the others had double pod part nos.

if you look under the foglight section, there are different fogs for the v6, and it says "specifically designed for the different V6 bumper profile"

so it must be different

What catalouge is that, I goto lrcat.com but its all foreign

freelander accessories catalogue LRML 1847/03

So these pods can't be fitted? Ive seen the single pods, can they?

Optimus Prime said:

freelander accessories catalogue LRML 1847/03

Click to expand...

I cant seem to find it

tis an old fashioned publication, seems to use a medium I think was called paper !

(pm me your email address and I'll scan and send the page - it's too big a file to upload on here)

Sorryfor coming back to this thread, just need some advice on a few things.

Firstly, I've been looking at different kind of spots n pods but just confused as to what can fit to my freelander. It's a 2000 chasis from 1a (or something along those lines) so ive found these parts, single spot pods(pre01my stc7909) and fogs(pre01my stc7908). O these fit my hippo as im unsure what pre01my stands for.

Secondly, some websites that are seling the pods say that they are compatable only if the soft nudge bar(stc50413) is fitted. Could this be subistuted for the number plate plinth (stc50249)? If one or the other of those are used does that mean I will have to lose the spotlight brackets I have bolted to the cross memberand poke through the bumper?

Thirdly, they say the fogs (stc7908) can't be fitted is to the auto trans cooler and fbh,how much is the fbh in the way or could there possibly be enough space for the fog.

The part numbers ive quoted i think are the right ones I need.

Hope someone can help.
Regards

anybody got any ideas, do i have to right part numbers?

Hi, how did you get on with your lights? i've got hold of a full under bumper kit but don't know the wiring, it's got plugs, 2x looms, relay screws etc.
Do you have the wiring diagram as I will be struggling?
cheers,
Gord.

you can find the wiring diagram in haynes book of bollocks or rave, what year freelander you got?