Puma Man
New Member
- Posts
- 1
- Location
- Milton Keynes
I have just been fitting the Wipac SVX style headlights to my 2007 Puma.
I thought that the standard wiring loom would be compatible with this modification.
The headlamp levelling switch mounted in the dashboard with no problem and there was a plug laid up in the loom to plug into the switch, great.
I stripped out the nearside headlamp assembly and mounted the SVX headlamp in its place. There was a plug laid up in the loom to connect up the motor, super.
But when I came to do the same conversion on the offside I found no plug to feed the motor, damn.
Has anyone else come across this problem? Is there a sub loom to feed the offside motor?
At the moment the nearside unit is driving up and down on command, perfect.
I cannot see a simple answer to the offside unit.
I thought that the standard wiring loom would be compatible with this modification.
The headlamp levelling switch mounted in the dashboard with no problem and there was a plug laid up in the loom to plug into the switch, great.
I stripped out the nearside headlamp assembly and mounted the SVX headlamp in its place. There was a plug laid up in the loom to connect up the motor, super.
But when I came to do the same conversion on the offside I found no plug to feed the motor, damn.
Has anyone else come across this problem? Is there a sub loom to feed the offside motor?
At the moment the nearside unit is driving up and down on command, perfect.
I cannot see a simple answer to the offside unit.
