Disco 3 (LR3) Fault

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

fISKY

New Member
Posts
3
Location
stretford
hi

All this morning I set of for work as norm, got on the motorway it has a 50 mph limit, got into the 70 mph limit tapped the cruse control to bring it up to 70 mph limit and 2 warning lights come on and the engine went into "tick over" no response from the accelerator.....Any ideas??.

morning all

very sorry it is a D3 08 2.7 diesel, I pulled over turned it off then started it up with no further problems.

cheers lee.
 
Last edited:
Congratulations you've won this months prize for the vaguest post. Because I'm so happy go lucky I don't even mind that you can't be bothered with posting in the introduce yourself section, or that you can't be bothered with giving your name but the real reason your this months winner is we have no idea what vehicle your on about????
Welcome to the forum
 
Congratulations you've won this months prize for the vaguest post. Because I'm so happy go lucky I don't even mind that you can't be bothered with posting in the introduce yourself section, or that you can't be bothered with giving your name but the real reason your this months winner is we have no idea what vehicle your on about????
Welcome to the forum

I'm gonna take a wild guess and say it int a Series cuz it dint disassemble itself spontaneously when they hit 70 :D
 
learnt from experience

will need the DTC codes to be read

could be anything , turbo actuator arm sticking etc , list is endless with these
 
Back
Top