Electrical issue, full beam or flasher causes indicator light

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Jacko4x4

New Member
Posts
3
Location
Scotland
Hi there, puma 2.2 2013, wondered if anyone has any ideas. When you select main beam or operate the main beam flasher I get the right hand indicator on the instrument cluster light up. But not externally. Also noted that when I put the key in the ignition and turn to position 2 but don't start, right hand indicator on the cluster flickers, initially then go's away. I've checked and changed the indicator/flasher stalk but still the same. Any thoughts much appreciated
 
See I thought that also, so I fed a wire from the battery negative to the cluster, black wire, pin 17. And the fault remains.
It could be a fault with in the cluster unit, as I removed the whole unit and it looks like someone has had it opened up. As one of the tabs was already broken...new cluster unit is £600 ...

Still at a loss at what to try next...
 
Back
Top