P38A EAS opinion please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oakey

oakey

Well-Known Member
Full Member
Posts
2,092
Location
Mull of Kintyre
95 V8 auto 180k
I have an eas leak I think somewhere in valve block so want to change it for a refurbished one. With the temperature so low just now (-14?) forecast, am I likely to break the plastic pipes?
 
I would say its ok, they are made of very thick durable plastic, just make sure you push the mettle lug in holding it in, and PULL the pipe out don't jiggle it out
 
I changed ours out at -4C and the pipes were fine. As ^^^^^^, pull don’t jiggle. They will be stiff and unwilling to bend much.

I bought some spare pipe just in case.
M
 
You must log in or register to reply here.

Similar threads

rangie1998
P38A EAS some more questions!
Replies
16
Views
1K
rangie1998
rangie1998
8v_chris
Air leak detection - EAS woes!
2 3
Replies
52
Views
4K
j38
J
Montyjohn
P38A EAS Inlet Valve Stuck or leak?
Replies
7
Views
1K
Montyjohn
Montyjohn
IandiscoV8
P38A EAS Fault finding threads or files.
2 3
Replies
55
Views
4K
Mark Piercy
Mark Piercy
B
P38A EAS compressor running almost continuously
Replies
7
Views
1K
Mark Piercy
Mark Piercy
Back
Top