Eas fault

gemsdad · Aug 7, 2009

eas on my p38 went tits up,now sat on it's bump stops.took the pipes out of the eas pump and there is pressure in numbers 1, 2, 4, pipes but number 3, is no pressure.sounds like it's the air bag or leaking pipe.your thoughts on this please.

hammy2909 · Aug 7, 2009

prolly something wrong with the little unit inside the compressor, if the other 3 are going, and it's only number 3 thats wrong. Don't know the little workings inside the box, but that's my guess

gavbriggs · Aug 7, 2009

you could rig something up to pump it manually!

just to test it see whats going on.

gemsdad · Aug 7, 2009

hammy2909 said:
prolly something wrong with the little unit inside the compressor, if the other 3 are going, and it's only number 3 thats wrong. Don't know the little workings inside the box, but that's my guess

yes i'm going to take it to bits on saturday,

gemsdad · Aug 7, 2009

gavbriggs said:
you could rig something up to pump it manually!

just to test it see whats going on.

hi gav,i will connect up my compressor to see if it inflates the air bag,if it stays inflated it's the pump guts.if not it's the air bag.do you know which bag is number three air line.

Irishrover · Aug 8, 2009

Swap it out with one of the others that's working, that way you can identify whether it's the pipework/spring or the control valve in the box. P38A SuspensionHave - LandyWiki a look at the air circuit on here and see if it helps

gavbriggs · Aug 8, 2009

if you inflate the bag, only do it a little bit, dont want the car to know its moved or you'll end up with trouble!!!

it might be worth refurbing the block !

Eas fault

gemsdad

NOT BOTHERED.

hammy2909

Well-Known Member

gavbriggs

Well-Known Member

gemsdad

NOT BOTHERED.

gemsdad

NOT BOTHERED.

Irishrover

Well-Known Member

gavbriggs

Well-Known Member

Similar threads