Garth of the west
New Member
- Posts
- 36
Like the title says, opens fine from the outside, very hit or miss from the inside. Am I right in thinking that the wee spring kits on ebay will sort this out?
Door won't open from inside.......
- Thread starter Garth of the west
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
do a search.
Garth of the west
New Member
- Posts
- 36
Done a search, this has suggested the spring kits, would appreciate some constructive advice.
Headtester
Active Member
- Posts
- 581
- Location
- Ruislip
I'd appreciate some advice on this one too as my rear nearside door only opens from the outside??
battenberg
Well-Known Member
- Posts
- 2,101
- Location
- Birmingham UK
depends on your model...
200 or 300 - yes.
Series 2 - no.
Disco 3 or 4... - god knows!
pete5570
New Member
- Posts
- 180
- Location
- North East
if it opens from the outside it can't be the springs. You might need to look inside the door, there could be a loose rod or connection. If the spring has gone (i had to do all mine!), you will see the button drops slightly, if you pull the button up it should open, but this would be the case when opening from the outside.
- Posts
- 4,201
- Location
- North Norfolk
mine was doing this, just took the door panel off cleaned the half ton of crap out of the mechanism and sprayed shed loads of wd40 in it, works a treat.
V8_Disco
New Member
- Posts
- 1,180
- Location
- Shropshire
i take it you guys have made sure the child lock is off?
Garth of the west
New Member
- Posts
- 36
Thanks for the helpful replies. It's a 300, going to get the springs & strip it out & give it a good clean etc.
- Posts
- 4,201
- Location
- North Norfolk
Try just giving it a clean before you go buying things you might not need.
pete5570
New Member
- Posts
- 180
- Location
- North East
Yeh check everything before doing the springs, it's a right rave. If you an open it from the outside i doubt it will be the spring!!
