Disco 2 Disco 2 sls / compressor fuse location

Matt2e0fgx · Jul 1, 2020

Hello , I'm currently remove my sls and going to coils on the rear , airbags both gone , height sensors gone and so has the compressor .

I done the conversion and getting the suspension changed to rear spring in the bcu etc next week .

But where is the fuse I need to pull looked in my handbook and fuse 28 in the cabin is for sls but it also says abs system . Also found online a fuse in engine bag to pull but in my handbook doesn't identify one under the bonnet relating to sls.

Can anyone clarify the correct ones please ?

sierrafery · Jul 1, 2020

Hi. Let the fuses be, remove relay R5 engine bay, that's for the compressor, it's fed by fusible link FL9 but dont remove it cos it's monitored by the ECU...though if the vehicle was set to coils in the SLABS ECU (not BCU) the relay or fuse is no factor

Matt2e0fgx · Jul 1, 2020

sierrafery said:
Hi. Let the fuses be, remove relay R5 engine bay, that's for the compressor, it's fed by fusible link FL9 but dont remove it cos it's monitored by the ECU...though if the vehicle was set to coils in the SLABS ECU (not BCU) the relay or fuse is no factor

Thanks , are you some kind of discovery wizard? Everytime I ask a question you always seem to come up with the answer...

I have also removed the compressor and height sensors along with pipework . All plugs taped up and tied up on the chassis .

sierrafery · Jul 1, 2020

Matt2e0fgx said:
Thanks , are you some kind of discovery wizard?

with a huge lack of modesty i'd say that i am

(only when it comes to electrics)

Matt2e0fgx · Jul 1, 2020

sierrafery said:
with a huge lack of modesty i'd say that i am (only when it comes to electrics)

I'm ok at some basic electrics and soldering I'm pretty good . But more in depth vehicle electrics is not my string point . Ie I can trace faults with lights or if something isnt working to find a break of fitting new lights from scratch . Just built a loom other night for old chaps norton . But that's not hard .

Going back to the disco , just pull the relay out then ?

sierrafery · Jul 1, 2020

Matt2e0fgx said:
Going back to the disco , just pull the relay out then ?

As you wish, as i said if the SLS is disabled in the SLABS ECU it's no factor

Disco 2 Disco 2 sls / compressor fuse location

Matt2e0fgx

Active Member

sierrafery

Well-Known Member

Matt2e0fgx

Active Member

sierrafery

Well-Known Member

Matt2e0fgx

Active Member

sierrafery

Well-Known Member

Similar threads