Disco 1 mirror removal - how to..?
- Thread starter landowner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
V8_Disco
New Member
- Posts
- 1,180
- Location
- Shropshire
pull off the interior window strip
use a flat head to prize off the triangular plastic cover on the inside of the door behind the mirror
remove the 3 small bolts (10mm i think)
unclip the electric cables
done
use a flat head to prize off the triangular plastic cover on the inside of the door behind the mirror
remove the 3 small bolts (10mm i think)
unclip the electric cables
done
Thank you..
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
On the 200tdi discos pull off the triangular plastic bit inside the door and it's 2 phillips screws.
V8_Disco
New Member
- Posts
- 1,180
- Location
- Shropshire
yep my mistake :doh:
discool
Well-Known Member
- Posts
- 13,620
And unclip the electrical connection if the mirror is electric, as they were available on the 200 series.
The parts book shows either 3 x M5 bolt or 3 x No10 self tapping screws for the fixings.
V8_Disco
New Member
- Posts
- 1,180
- Location
- Shropshire
i got the electricity ones and they are held on by screws
martinhollings
New Member
- Posts
- 659
- Location
- newark/nottingham
park out sid the local shop aroun 7:15 in the morning to get your paper and some grub for dinner time and what do you no most of your mirror will have been removed... again...
You dont leave the engine running while you go in do you
Thanks chaps, will take it off in the week, in fact I'll take em both off.
and the bumper, and the wipers, and the back axle, and.......
