Disco 2 Disable alarm

Jgwoodley · Oct 25, 2017

How do I disable the alarm completely on a discovery 2? We leave the windows part down the majority of the time and the wind must be setting off internal sensors and sounding the alarm. I would like to completely disable the alarm system so I can still lock the doors and have the windows down slightly. Not concerned about security of the vehicle.

I have a Hawkeye- is it completed through this or is it a case of following an algorithm of key turns and buttons being pressed/ held down?

Many thanks in advance,

James

neilly · Oct 25, 2017

Altho disabling the alarm has been discussed on here before.

Cheers

Jgwoodley · Oct 26, 2017

neilly said:
View attachment 134032
View attachment 134033
Altho disabling the alarm has been discussed on here before.

Cheers

Thanks Neilly,

Had a good search with no luck. Many thanks for your help.

Cheers,

James

neilly · Oct 26, 2017

@Jgwoodley

have a read here.

https://www.landyzone.co.uk/land-rover/disco-td5-immobize.309448/#post-3896124

Cheers

sierrafery · Oct 26, 2017

I've re-read that post again and again and i can reiterate that with hawkeye it should work as stated there by me cos since then i've done it at least 4 times more always with hawkeye cos it's more reliable with the BCU in this area ... the gist with hawkeye is that after you made any settings you must scroll through all the options untill the end of the program when hawkeye asks you if you want to change factory settings then confirm and follow the next step which iirc is to turn ignition off then on... simply changing the setting and exiting the menu has no effect with hawkeye cos everything will return to the previous status

neilly · Oct 26, 2017

sierrafery said:
I've re-read that post again and again and i can reiterate that with hawkeye

Who are you arguing with???

Cheers

sierrafery · Oct 26, 2017

it seems that i really have problems with english language if that statement looks like i'm arguing with somebody

Jgwoodley · Oct 26, 2017

sierrafery said:
I've re-read that post again and again and i can reiterate that with hawkeye it should work as stated there by me cos since then i've done it at least 4 times more always with hawkeye cos it's more reliable with the BCU in this area ... the gist with hawkeye is that after you made any settings you must scroll through all the options untill the end of the program when hawkeye asks you if you want to change factory settings then confirm and follow the next step which iirc is to turn ignition off then on... simply changing the setting and exiting the menu has no effect with hawkeye cos everything will return to the previous status

Many thanks for your reply with your experiences of disabling the alarm system. Most helpful.

Kind regards,

James

Disco 2 Disable alarm

Jgwoodley

Member

neilly

Well-Known Member

Jgwoodley

Member

neilly

Well-Known Member

sierrafery

Well-Known Member

neilly

Well-Known Member

sierrafery

Well-Known Member

Jgwoodley

Member

Similar threads