Litch
Well-Known Member
- Posts
- 2,235
- Location
- Oxfordshire
For Sale - From Def 90 300TDi unless specified.
If no photo available then PM me and I will do my best to get one taken ASAP.
Will be adding lots of other items as I come across them.
Bonnet finished in green. This is excellent with no holes, dents or scratches - not the usual tired old tat.
£75.
Pair of (wide) front radius arms. £35.
Pair of rear trailing arms. £25.
Drag link C/W 2xTRE. NOS, removed from brand new (crated) TD5 axle and never used. £10.
Galvanised fuel tank front bracket NRC9474. £30.
Pair of galvanised bulkhead to front wing stays. £10.
Pair of YRM alloy rear tub to wing stays (MUC9220), painted but un-used. £25.
Pair of rear A-frame arms. £20.
Rear axle ball-joint in fulcrum bracket x2. Have a spare and press in your old joint. £10 each.
T-Wash for your new galvanised chassis. Bought 5L as I had no idea how much I would need and it turns out I only needed just over 1L for a 90 chassis. £10.
N/S front door card in grey. £10.
Bearmach BA109GAL rock sliders.
Deep section and TWIN mounting points at the bulkhead (most types only have one), galvanised finish. Don't believe these are available any more in the galv finish.
£65.
Used SS full bore downpipe for Defender 90 300TDi. Good serviceable condition, will last donkeys years.
Used SS straight through centre section by Double-S for Defender 90 300TDi. Only 2-years old.
Used MS tailpipe for Defender 90 300TDi, Only 2-years old. Part No. ESR3463. I get at least 5-years out of these so this one is good for another 3-years.
All have good hangers & flanges.
£25 the lot or will split.
Has been replaced with Demand Engineering full SS system.
Larger items pick up only from MK43 (Beds), possibly take to ST4 (Staffs) as I go up there occasionally.
PM replies only please.
Open to (sensible) offers.
If no photo available then PM me and I will do my best to get one taken ASAP.
Will be adding lots of other items as I come across them.
Bonnet finished in green. This is excellent with no holes, dents or scratches - not the usual tired old tat.
£75.
Pair of (wide) front radius arms. £35.
Pair of rear trailing arms. £25.
Drag link C/W 2xTRE. NOS, removed from brand new (crated) TD5 axle and never used. £10.
Galvanised fuel tank front bracket NRC9474. £30.
Pair of galvanised bulkhead to front wing stays. £10.
Pair of YRM alloy rear tub to wing stays (MUC9220), painted but un-used. £25.
Pair of rear A-frame arms. £20.
Rear axle ball-joint in fulcrum bracket x2. Have a spare and press in your old joint. £10 each.
T-Wash for your new galvanised chassis. Bought 5L as I had no idea how much I would need and it turns out I only needed just over 1L for a 90 chassis. £10.
N/S front door card in grey. £10.
Bearmach BA109GAL rock sliders.
Deep section and TWIN mounting points at the bulkhead (most types only have one), galvanised finish. Don't believe these are available any more in the galv finish.
£65.
Used SS full bore downpipe for Defender 90 300TDi. Good serviceable condition, will last donkeys years.
Used SS straight through centre section by Double-S for Defender 90 300TDi. Only 2-years old.
Used MS tailpipe for Defender 90 300TDi, Only 2-years old. Part No. ESR3463. I get at least 5-years out of these so this one is good for another 3-years.
All have good hangers & flanges.
£25 the lot or will split.
Has been replaced with Demand Engineering full SS system.
Larger items pick up only from MK43 (Beds), possibly take to ST4 (Staffs) as I go up there occasionally.
PM replies only please.
Open to (sensible) offers.
Last edited:
