Clarence the cross eyed lion
Member
- Posts
- 26
I have a brake problem with my ,94 lse. The brakes are constantly on on all four wheels and won't release. I have taken it to a specialist who has done the following:
1 Changed the ABS module
2 Changed the ABS sphere
3 run 3 litres of brake fluid through the car and bled the system 3 times.
4 The pump charges up to pressure and then turns itself off as it should do.
5 If the bleed nipples are undone the brakes release straight away.
After all of this......the brakes are still binding, not as bad as they where but still binding quite hard. My mechanic is scratching his head and suggested posting on this forum for any ideas!
If somebody has had a similar problem could you please please let me know the answer?
The money this car has had spent on it I could have bought a series three range rover! Hopefullt this is the last of my woes as everything else that has gone wrong has been replaced.
Cheers
C
1 Changed the ABS module
2 Changed the ABS sphere
3 run 3 litres of brake fluid through the car and bled the system 3 times.
4 The pump charges up to pressure and then turns itself off as it should do.
5 If the bleed nipples are undone the brakes release straight away.
After all of this......the brakes are still binding, not as bad as they where but still binding quite hard. My mechanic is scratching his head and suggested posting on this forum for any ideas!
If somebody has had a similar problem could you please please let me know the answer?
The money this car has had spent on it I could have bought a series three range rover! Hopefullt this is the last of my woes as everything else that has gone wrong has been replaced.
Cheers
C
