clutch release point

Hi, after changing my clutch master and slave cylinder i adjust my clutch like workshop manual.
My question , the clutch pedal was pressed and open/release 4cm before the pedal hits the floor.
Is this ok or not?

Best

i fitted new clutch a couple of months ago my pedal is at the bottom too as long as its releasing to engage and change gear its ok

I've been through a few clutches, and they all have personalities of their own, especially when I change the cylinders at the same time. They differ a bit in terms of where the bite point ends up in the pedal travel, and how easy it is to control them for activities like creeping along at a junction where you're facing uphill. Provided it's usable and letting you change gear it should be alright.

Did you change the clutch fork and it's pivot bolt?