AndyTheLandy(Tom)
Member
- Posts
- 39
- Location
- Nottinghamshire
do i use synthetic or mineral oil in my series 3 1981 clutch ???
CLUTCH FLUID
- Thread starter AndyTheLandy(Tom)
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Dragonwalker
Well-Known Member
- Posts
- 3,479
- Location
- Out the back
Brake or Clutch Fluid , if you don't know, don't put anything in until you been shown by someone who knows what they're doing ...
Dragonwalker
Well-Known Member
- Posts
- 3,479
- Location
- Out the back
steve2286w
Well-Known Member
- Posts
- 4,577
- Location
- monkeyangerland
When the master cylinder or clutch cylinder seals go the mineral oil just strips the paint from the footwell plates , this woundnt happen with silicon oil
Dingo Croft sell dynolite for £30 a litre , never needs changing and don’t absorb water
Dingo Croft sell dynolite for £30 a litre , never needs changing and don’t absorb water
Pretty sure I have synthetic dot 4 in my clutch and brakes. Needs to be put into a clean new system.
This article worth a read.
http://www.mossmotoring.com/brake-fluid-for-classic-british-cars/
This article worth a read.
http://www.mossmotoring.com/brake-fluid-for-classic-british-cars/
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
DOT 4 - backards compatible and works fine. Avoid DOT 5.
