changing speakers

Jadegirly2k · Feb 5, 2011

Hi everyone

I wanted to change the speakers in my 2001 freelander. I bought a pair of hertz Car Audio & Security: Car Stereo, Speakers & Subwoofers, Car DVD Players, GPS and CD Changers that don't fit (the window won't come down), not sure if its the depth and wondered are there only specific speakers I can change too ie JBL's or do I need a spacer. What depth should I be looking for? I'm not sure where to go from here.

Any help appreciated

Thanks

Jade

freelander2002 · Feb 5, 2011

£85 on speakers wow

RichM · Feb 5, 2011

I bought these for my Freelander:

Halfords | JBL GTO628 - 6.5'' Two Way Speakers

Though, they were only £49.99 when I got them last June.

gstuart · Feb 6, 2011

hiya

i replaced my speakers with some pioneer ones, all i done was to remove the door panel lowered the window and took a measurement from the window glass to the metal of the door.

i imagine if you went into halfords and gave them the depth measurement they would be able to tell you what speakers will fit.

when i replaced mine in addition i measured the diameter of the speakers so that i knew they would fit the door aperature and just had to redrill the holes for fixing.

hope im not telling you how to suck eggs and that it may help you

gary

martyc · Feb 6, 2011

Get some spacer rings made up or you might be able to get some from an ICE shop. Hertz are good I love them and have used them lots

Jadegirly2k · Feb 6, 2011

Thanks for your advice guys.

Do I need special spacers or will universal ones do? I'm not really sure how they work ie if they fit the holes in the car or if I drill new holes to make it fit. Autoleads don't make spacers for the freelander

Or do the jbl's just fit without the need for spacers?

Also how easy or hard is this to do myself? I'm getting quoted £200 fitting charge from car audio security. I'm really just tempted to do it myself.

I just want decent sound in my car

J

mick 1986 · Feb 6, 2011

If your going to make spacers, why not make some yourself? Get a small thin section of MDF or plywood and make your own using the speaker template. It's easy enough to do.

martyc · Feb 6, 2011

Check out eBay item 170591212899

It's probably what you're looking for

changing speakers

Jadegirly2k

New Member

freelander2002

Active Member

RichM

Well-Known Member

gstuart

D3 Grandad

martyc

New Member

Jadegirly2k

New Member

mick 1986

Well-Known Member

martyc

New Member

Similar threads