Canbus

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Rancid

New Member
Posts
11
Location
Manchester
Hello all my name is tony and I live in sunny mcr I own a l322 03 plate and after much head scratching and the purchase of a bearmach hawkeye obd11 reader I find my self in the same point as when I started I have a canbus error that keeps locking out my suspension I have changed ride height Sencors and the valve block on the tank renewed the compressor and change an air pressure relief valve on the tank and yet still the canbus fault and still inactive air suspension help somebody anybody before I take a hammer too it
 
Can bus is networked and your fail could be anything from a blown module to chafed wire. But there has been cases of water damage causing can bus errors

If I remember a guy called matt Stevenson had can bus errors etc
 
It's near on impossible to find the fault when the message is canbus fault.
It could be anywhere.
To clear it, you need the full diagnostic kit with every module & you have to chase the fault out the system. You need to keep clearing every module to hopefully, it ends up in the binnacle, & fingers crossed, when you clear the binnacle fault the canbus fault will disappear.
 
Back
Top