Disco 2 Bust flexplate.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Henry_b

Think outside, no box required.
Posts
15,509
Location
somewhere else
The noise saga with my D2 has been realised, when i pulled the bell housing cover plate off and saw the massive crack going up the flexplate, upon inspection with my screwdriver i can make it rattle..

So issue #1 found...

My Dilemma is whether to drop the gearbox, or pull the engine out?

I'm working on a gravel drive, so physically pulling the motor would make sense, however what do the eggspurts think..

@jamesmartin any words or wisdom?

Cheers

H
 
I did a l200 gearbox on a concrete drive for the clutch. I don't remember it being that hard but was very very heavy so want to be confident it's on the jack securely.
 
Back
Top