Brushable seam sealer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Chrisw8

Well-Known Member
Posts
1,969
Location
Top of the Hill
what make brushable seam sealer are you guys using.?

I’ve been using Frost’s own but they ain’t got any.

Any recommendations? or are they all the same.
 
I'm gunna get some bilt hamber stuff. I sound affiliated don't I! My theory is all the rest of their gear is good so why not. I've been using a poly sealant from screfix that's silicone free On top if my primer. From now on though I'm going to prime, lay a coat of epoxy mastik, seal, then following coat to finish.
 
I use it over the welding.

I put this on in order over my welding .....

Bonda prima 1st coat.
Squeezy sealer out of tube.
Brushable seam sealer.
Bonda prima 2nd coat.
Chassis black 1st coat.
Chassis black 2nd coat.

Maybe overkill , but I like it !!!
 
Think I'm going to put mine onto the first coat of top then overcoat. I was putting mine straight over primer but where everything is still such dirty work the sealer is getting mucky before I get chance to top coat
 
Back
Top