Breaking Disco TD5

Ive a couple of Discovery TD5s Im breakiing.

All parts cheaper than Ebay

Hi do you have any pics?

Have you got both rear indicator cluster lights for a 1999 td5 disco. If yes, how much with postage to Yorkshire. Many thanks Dave.

Do you have the air canister/pipes from the right of compressor that go to the rear air bags. I melted mine whilst welding as the heat went through the fire blanket. Ive patched them up for the moment with new vacum hose over the top but could do with replacing them.

Dan.

Do you have the lid for the suspension air compressor box? Mine fell off and got flattened

I am looking for the intermediate plate that fits between the torque converter housing and the gearbox for a TD5 Auto 1999.
It is "520" on this picture.
Thanks, Ian.

I'm after the front passenger seat (bottom only) in beige leather.

I have been looking for a couple of 15p greentop injectors.
Were the engines running ok.

stpaulinus said:

Have you got both rear indicator cluster lights for a 1999 td5 disco. If yes, how much with postage to Yorkshire. Many thanks Dave.

Click to expand...

I have ! Pm me

Cruise control kit ie master switch and the steering wheel control please, oh, post 2002 in black not grey. Thank you.

Jon

What year and spec are the discos your breaking, I would be interested in a few bits if you have them.

Hi, am interested in a rear window if it's a facelift model, and an xyz switch if an auto? Also front seat cushion if it's the black omg yes the dickie seat levers 8)

Dickie seat levers are available on EBay from a guy that 3D prints them. £20 for the pair and they are stronger and better looking than the originals.
No connection etc. just a positive review from a previous buyer.
https://www.ebay.co.uk/itm/3D-printed-land-rover-discovery-2-99-04-rear-seat-squab-release-handle-pair/123422171579?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Do you by any chance have a fog light surround?
Fog Lamp Bezel - AWR4717LML

After one for the passenger side

For a 2001 pre facelift

Si Click said:

Dickie seat levers are available on EBay from a guy that 3D prints them. £20 for the pair and they are stronger and better looking than the originals.
No connection etc. just a positive review from a previous buyer.
https://www.ebay.co.uk/itm/3D-printed-land-rover-discovery-2-99-04-rear-seat-squab-release-handle-pair/123422171579?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Click to expand...

Cheers for that, very useful

Im after a good running 15p TD5 engine mate have you got any forsale ??

I need RF Receiver for mine 2004, part number YWY000080.

EeEk said:

Ive a couple of Discovery TD5s Im breakiing.

All parts cheaper than Ebay

Click to expand...

I PM'd you a couple of weeks back - can you drop me a line? Cheers

Bit of a long shot, but do you have a dog guard, with fixing brackets.

beanwood said:

Bit of a long shot, but do you have a dog guard, with fixing brackets.

Click to expand...

I do.....if I can still find the brackets. Will have a look tomorrow.