Disco 1 Brake question. Not working correctly.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi All
When out today and very, very occasionally the brakes went hard and it felt like the ABS went on but not allowing much pressure to be applied and therefore not stopping very well. When lifting off the pedal, and reapplying the brakes sometimes worked without the issue coming back and sometimes not, needing me to lift again. Sometimes when the hard pedal was happening it did 'give' and went to normal braking. All very disturbing when in traffic.

The only work done recently was a new front swivel which meant I had to disturb the ABS sensor and caliper but all has been ok until today.
Any ideas?
Thanks
Tim
 
Hi Tim
Mine were like that:eek: So I took the hole lot off & re-piped it all:) NOW it stops as fast as I wont it to ! + I took the valve off that sit's on the inner wing ! sounds like air or the motor in the abs int working !
 
Back
Top