Body cappings Defender Puma 2008

The body cappings on my 2 year old Defender 110 Hard Top Puma are rusting nicely & will soon need replacing in order to keep the vehicle looking in a respectable condition. I have been googling but have been unable to find any. Please is anyone aware who supplies them. I will need the 2 long side ones that also go round the back, the 2 small rectangular ones (with the corner cut off) that one of the hinges attaches to and the back corner ones that the lights are attached to. Oh and did I mention THEY MUST BE GALVANISED!!!!!!!!!!!!!!!!!!!!!!

Mike

i looked for some before but for a 300tdi 90 and only main dealer come up with some

If yours haven't rotted through yet then get them galvanised yourself (surface rust is ok as that will be removed). The actual process is very cheap (I had mine done last year for £30) and if you check with the company on which day they will be prepping & dipping your parts you should only be without the vehicle for 2-3 days.

Thanks

When I enquired for my Td5 I was told there were 2 options available from a Land Rover dealer. Plain steel primed for painting and galvanised then abraded. It sounds as if they galvanise them then rub it off again!

Mike