storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Evening All!
Disco 1 200tdi, speedo needle broke so I have changed the entire binnacle but now the handbrake light, diff lock light and pre-warm light are on constantly, the fuel gauge reads the temp and the temp gauge goes immediately to red on start up!!
I've checked all connections and there is no way to put them in wrong!
If I put old binnacle on its fine, apart from the speedo.
Must be an earth issue but there are no wires unconnected or broke.
The binnacle is used but correct part number. I'm now thinking maybe the new binnacle is faulty.
I'm stumped..any ideas?
Disco 1 200tdi, speedo needle broke so I have changed the entire binnacle but now the handbrake light, diff lock light and pre-warm light are on constantly, the fuel gauge reads the temp and the temp gauge goes immediately to red on start up!!
I've checked all connections and there is no way to put them in wrong!
If I put old binnacle on its fine, apart from the speedo.
Must be an earth issue but there are no wires unconnected or broke.
The binnacle is used but correct part number. I'm now thinking maybe the new binnacle is faulty.
I'm stumped..any ideas?
