BCM's

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

alpinapete

New Member
Posts
60
Location
Cwmbran,South Wales
I have a Holland and Holland just had it in December 29th to January 5th for not starting although it was turning over. It turns outit was the BCM loosing its codes main dealer got it running again after getting codes from Landrover UK. Same has happened again wont start but turns over fine, why is this happening?:doh: Looks like a tow job back to the main deler in the morning!!!
 
Last edited:
alpinapete said:
I have a Holland and Holland ..... wont start but turns over fine, why is this happening?
Click to expand...

First of all, lucky bugger, they're nice aren't they. :) Secondly as others have said, I'd really spend some time checking the voltage and the electrical system since it does sound like low volts to me.
 
Hi and thank you for all the responses, the year of my vehicle is 2000 on an Xplate. Since it went in some times when switching on the ignition it displays engine disabled press key fob, after doing this it will start, there does not seem any pattern to this its quite sporadic. Athough I fitted a new battery it drained that down to 4 volts I thought there was a problem with the battery so had an exchange. On checking the voltage before starting it showed 12.6 volts that immediatly jumped to 14.06 volts on starting the engine it did not drop below this when keeping the revs at 1200 with the lights on and the heated rear window. However after trying to start on saturday decided to charge the battery before it went into the dealers, it was on charge for 5 hours and still charging. The wife wants to get rid of the car, we both love it but is it turning into a money pit?
 
They're all money pits. In your case though, it looks as though you're going to have to bite the bullet and buy and updated RF receiver from the main dealer. I think Rangiegall posted some pictures on here a while back showing the old and the new ones opened up. No external difference but completely different inside. Until you change that, you're not going to know what's happening.
The sync-mate will work on your model OK.
 
if your bat is going flat over night, i would think tis your rf box, tis new one or take singal wire off.. as i said earlyer get a resync box it will save you loads of greef..
 
the RF RECIEVER you want to upgrade to is part number YWY500170. but if you buy one from a random person dont take it for granted that because it sais YWY500170 then thats what it is as people swap and change the internals to make more money. find out what they should look like inside by simply googleing the part number. well thats what i did anyway lol. all the best ;)
 
breakermart said:
the RF RECIEVER you want to upgrade to is part number YWY500170. but if you buy one from a random person dont take it for granted that because it sais YWY500170 then thats what it is as people swap and change the internals to make more money. find out what they should look like inside by simply googleing the part number. well thats what i did anyway lol. all the best ;)
Click to expand...
DSCF3811.JPG


Hope this helps with the confusion
 
You must log in or register to reply here.

Similar threads

R
2000 Thor 4.6 fuel/starting problems
Replies
5
Views
526
richardtamps
R
Charlot
Srs faults.
Replies
3
Views
690
Anan
A
L
L322 4.4v8 m62 with lpg
Replies
5
Views
390
Littlelionman
L
C
trans fail safe prog
Replies
4
Views
688
courtec
C
A
Freelander 1 Immobilizer. Issue. Run away or worth trying
Replies
0
Views
465
Alex1000
A
Back
Top