ball joint part no

chris07 · Mar 14, 2011

hi all help neaded with part no for the ball joint that conecks the drop arem to the stering rod on a 79 series 3 88" or is it just a track rod end ?
and if so is it rh or lh

thanks chris

crashbox · Mar 14, 2011

I restored an 82 Lightweight a few years back and bought all new track rod ends from either Paddocks or Craddocks. If you ask them they will send you the one you need.

chris07 · Mar 14, 2011

i have phond paddocks today and thay dont no witch one it is so av just to by both a do have a set of trackrod ends for a erlay 90 would thay fit ?

crashbox · Mar 14, 2011

I would phone back and ask to speak to someone wot knows about their Landies.

crashbox · Mar 14, 2011

As in, The Organ Grinder, not his Monkey.

oxides · Mar 14, 2011

Not sure a 90 one would fit 'cos the part numbers are different. Left or right hand thread? depends which way the rod was put on last. You might as well replace both ends if the rod is out, the bits aren't expensive.

jamesmartin · Mar 14, 2011

rtc5867 rh rtc5868 lh series different to defender or disco

RobertP · Mar 14, 2011

"thay dont no witch one it is"

Be fair! The dealer would need to know if you need one with a right-hand thread or left-hand thread.

chris07 · Mar 14, 2011

thanks for the replys guys as alwes a grate help

ball joint part no

chris07

Active Member

crashbox

Well-Known Member

chris07

Active Member

crashbox

Well-Known Member

crashbox

Well-Known Member

oxides

Well-Known Member

jamesmartin

Well-Known Member

RobertP

Active Member

chris07

Active Member

Similar threads