B post blues

Hi
i am rebuilding a LWB station wagon, and i have replaced the A post, the cills and rebuilt the C post / triangular panel.
if i line through the body curve the B post is low by 8mm.
the roof is straight and the B post is tight to the roof.
we have tried to bend it by jacking the whole lot up on the B post but it is too strong to move.
Question:
should i worry about it if they are all like that or,
is there a way?
Answers on a post card......

Which way is it leaning out? Forwards backwards left or right?

if you're going for a nice looking landy at the end of it you gotter get it straight somehow, even if it's (last resort) with 8mm of filler on the shoulder.
looking down the shoulder line of any decent landy needs to be straight and it'll **** you off every time you look at it if it's out.
are you sure the A-post repair is in the right place and have you trial fitted the doors yet?