Aux pulley mount replacement.

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #1

Hi, does anyone know if the fan belt pulley is available and replaceable? Now, I don't mean the actual pulley I mean the bit it bolts to. Four bolt holes and I assume press fitted to the bearing.
Just discovered one of my bolts is loose. On further inspection it is broken. A previous owner had goosed it and 'silly' coned the one bolt in

 

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #2

Oooooo. I found this

Land rover 300tdi viscous coupling flange | eBay

Land Rover Defender ,Discovery ,300tdi viscous coupling flange made from Bright Steel Billet 605M36T, this is a very tough steel cnc machined as a full round ,(with no ears to snap off ) and the precise machining ensures your original bolts will fit as intended.

www.ebay.co.uk

Very sexy.....

 

marjon

Well-Known Member

Full Member

Posts

16,834

Location

Bulgaria

• Jul 4, 2024

• #3

Just drill and helicoil it. cheaper than being sexy .

J

 

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #4

marjon said:

Just drill and helicoil it. cheaper than being sexy .

J

Click to expand...

I can't, the bolt hole is actually broken. The outer half of the hole does not exist....lol

 

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #5

1 picture, look inside the hole then you will see what I mean....

 

Attachments

• 
  IMG_20240630_111731608.jpg

  167.8 KB · Views: 80

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #6

I said it a was sexy as the guy on eBay makes them himself and is round. No wings for each bolt hole to snap off

 

marjon

Well-Known Member

Full Member

Posts

16,834

Location

Bulgaria

• Jul 4, 2024

• #7

I guess its a question of how sexy does your wallet feel?
Can you weld?
Worth a short with a nut/welder/grinder.

J

 

H

Hicap phill

Well-Known Member

Posts

16,319

Location

Wiltshire

• Jul 4, 2024

• #8

Try metal weld putty. It says you can drill & tap it..
But it would hold a nut & washer in place for another option,

 

currymunster

Well-Known Member

Posts

796

Location

Folkestone, Kent.

• Jul 4, 2024

• #9

Repair was an option as yes, I can weld and could easily weld a nut to it. My thoughts were balancing, but when I spun I it wobbled. Not like a buckled wheel but like the pulley wasn't central......?