Auto to manual conversion tdi 300

Phantom_Mark · Dec 24, 2010

Can anyone just point me in the right direction please ?

My auto is definitely fubar.

I have a box and box cross member, also on the list is a clutch (whilst the box is off makes sense) clutch master cylinder, clutch pedal assembly , slave cylinder I am hoping to not fit ? Also flywheel on the list to buy. Will I need a bell housing ?

Interior centre console bits and gearnob and brake pedal

Thanks

Will I need a bell housing or other parts I have forgotten ?

jamesmartin · Dec 24, 2010

i have done a few including edc ,all parts easily available 2nd hand just bolt on if edc you will have to attach crank sensor through fly wheel housing and drill 4 x hole 90 degree apart screw stud in and cut to fit sensor

disco dude · Dec 24, 2010

Never heard of that for the sensor before good idea cheaper than another pump.

Have you been given a price for the repair of the box? Or is it the converter?

Phantom_Mark · Dec 25, 2010

No idea what the exact problem is with it. Just leaps between 2nd and 3rd gear. Been on at the local specialist 4x4 for a full service including box filter and oil and fluids etc and no better. Will be happy to see the back of the auto to be honest anyways. Paid 100 for a box from a breaker which has been tested and has warranty so going with the conversion now.

jamesmartin · Dec 26, 2010

is yours edc as will go well with the extra bhp,which ever will still need fly wheel housing ,flywheel bolts etc

Auto to manual conversion tdi 300

Phantom_Mark

New Member

jamesmartin

Well-Known Member

disco dude

Active Member

Phantom_Mark

New Member

jamesmartin

Well-Known Member

Similar threads