Freelander 1 Any ideas to fix this....

anubis757 · Dec 2, 2020

Hello
I have been killing my head how to fix this.
Looks easy but its not because the pivot that goes in side the door moves so it can be a just pin...
Did anybody had this broken and fix it?
Many Thanks

Nodge68 · Dec 2, 2020

anubis757 said:
Did anybody had this broken and fix it?

CA glue or 2 part epoxy.

jedi · Dec 2, 2020

Hot glue a suitable door clip in its place..

kernowsvenski · Dec 2, 2020

I had to fix mine back a while ago. I used silicone adhesive

deangermouse · Dec 9, 2020

I glued a small piece of 6mm air pipe in place, used a round flat head self tapper and then glued the securing plastic piece onto the screw, glue gun on the securing plastic bit that goes into the door frame allows it to move a little
hope that helps

Avocet1 · Dec 10, 2020

I'd be looking for one off a scrapper. I've never had that much luck glueing plastic trims.

anubis757 · Dec 10, 2020

FIXED!!!!
I used a wall anchor and glued one of trim pieces (right) I also reinforced the other one with some hot glue...ITS BACK IN THE CAR
Many Thanks My Friends

Freelander 1 Any ideas to fix this....

anubis757

Active Member

Attachments

Nodge68

Well-Known Member

jedi

Well-Known Member

kernowsvenski

Well-Known Member

deangermouse

Active Member

Avocet1

Well-Known Member

anubis757

Active Member

Attachments

Similar threads