any help please with replacing window regulator on p38 1999

hi all new to the landrover ,bought a 1999 4.0se dual fuel last week with few probs to sort out ,
could any of you guys give me any help with replacing the drivers side window regulator ,i have bought a new one and have took the door card off but i am a bit paranoid to continue with out a bit of knowledge first,

any help appreiciated!!!!

thanks again

had the same problem with mine , looks a bit daunting doesnt it , but its not that bad just remove electrics , i driiled out the rivets but replaced them with small nuts and bolts as advised on here , i found it easier having someone to help me just to support the glass whilst removing the old reg and fitting the new.

Hi, had to do my drivers side regulator last week.Pressed the down button, window went half way down then dropped like a stone !I found the regulator arm had sheared its three tiny spot welds that held it to the main pivot point.Repaired with better weld and replaced in about 30mins.Its a lot easier to pull the 2 clips off the rollers than trying to locate the slides in the bottom of the windows, and yes 2 pairs of hands is a must.I personally drilled the 3 rivets out and replaced with rivets again just because i had the right stuff to hand.Dont worry about the job,quite easy.

many thanks guys ,im gonna have a pop at it 2moz,
i have been searching the net for a guide on how to do this but to no avail ,

any of you lot seen a guide for this ????

thanks again for all your help

sticks said:

many thanks guys ,im gonna have a pop at it 2moz,
i have been searching the net for a guide on how to do this but to no avail ,

any of you lot seen a guide for this ????

thanks again for all your help

Click to expand...

Have a search on here for range rover manuals, you can download one in 5 mins for free.

hi knifty ,any chance of a link or can anyone be so kind to email it to me as zip ,as the ones im finding for my 1999 p38 are gonna take about a week to download!!!!,

cheers

[email protected]

sticks said:

hi knifty ,any chance of a link or can anyone be so kind to email it to me as zip ,as the ones im finding for my 1999 p38 are gonna take about a week to download!!!!,

cheers

[email protected]

Click to expand...

If someone emails it, you will still have to download it to see it, only this time you download it with the email. The manual is in PDF format which doesn't ZIP very well as PDF is already a pretty efficient (>90%) format.

The quickest way is probably still to download it directly yourself from a website as 20mb emails are slow to send and route.

well just an update,managed to do me regulator without the help of rave ,took about 40 mins not bad really for a novice ,

thanks all for your help,

but your still going to download RAVE right?

-Wills

dont know if i will bother as it will take a good day by the looks of it,i only get 7g a month download size with 3 broadband,maybe if i get really stuck on somthing but hopfully shes alright for now ...i say for now, ,

sticks said:

dont know if i will bother as it will take a good day by the looks of it,i only get 7g a month download size with 3 broadband,maybe if i get really stuck on somthing but hopfully shes alright for now ...i say for now, ,

Click to expand...

7 gig/month .... luxury ... I only get 2 gig/month from Pipex

only 2? and theres me thinking i had it hard,might just be my slow connection or somthing as its 3 network sim card in a dongle,

strange i just posted a new topic regarding a leaking engine oil cooler and its dissapeared ,does paul daniels use this site too?

If you don't want to download RAVE, you can get it on CD's from Egay for a couple of quid.