AMK compressor change

Nightsman32 · May 23, 2020

Hi guys

Bought genuine amk compressor going to fit it monday do i need to lower the suspension to access mode before swapping over or dosnt it matter.
Thanks guys

pwood999 · May 23, 2020

Nope. Assuming it's a P38, the EAS compressor can be changed at any height. Undo 3 nuts & disconnect the pipe to the valve block.

wammers · May 23, 2020

pwood999 said:
Nope. Assuming it's a P38, the EAS compressor can be changed at any height. Undo 3 nuts & disconnect the pipe to the valve block.

It isn't, obviously again someone has not read the first post in the section.

Henry_b · May 23, 2020

If it is in Fault mode, chances are it won't allow you to lower the her..

You should be able to replace it with her in standard height..

However assuming you have the tech to erase any faults, it might be worth clearing the faults with the current compressor and seeing if it'll stay out of fault mode long enough to allow her to lower!

Nightsman32 · May 23, 2020

Suspension works guys just got a chinese compressor on at the moment its ery noisy so havnt got long left so going to change it while its still working.

Nightsman32 · May 23, 2020

Also sorry should of stated its a 2008 RRS not thr P38

AMK compressor change

Nightsman32

Active Member

pwood999

Well-Known Member

wammers

No longer with us, RIP

Henry_b

Think outside, no box required.

Nightsman32

Active Member

Nightsman32

Active Member

Similar threads