alternative oil cooler for 4.0 p38

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sticks

New Member
Posts
96
Location
north london
is there an equivilent cooler for a 4.0 p38 i can buy and install as the rr one seems to be infamous tryed everywhere for it ,model no esr 3204 need one asap!!!
new or s/hand as long as it dont leak!!!
cheers
 
cheers zzr i forgot to say im in north london so can travel upto 70miles approx,

thanks tho did see that one on the bay but miles away
 
thanks again zzr ,i got desperate and rang that guy with the ebay ad and guess what not in stock ,a bit cheeky to list 4 available !!
rang foleys and he gonna ring me back if he can get for tomorrow ,so fingers crossed,

thanks again m8y
 
hi ,im waiting for foleys to ring me and tell me its been delivered this morn,cant wait as this stupid part has been a nightmare to locate!!!
fingers crossed i should be back on the road by mid day ,

thanks for that info m8y,
 
got the cooler HOOORAYYY!!!!,all fitted apart from the righthand side pipe the one with the bigger nut,unfortunatly it was shredded up bad so now need one of theese!!!!anyone got a part no please,

thanks
 
Look at my reply to your other post regarding cost. Hose part nos. are listed but you will have to check which is which. I cut the steel part of the pipe on mine, slid the nut off and ran an M22 fine thread tap down the nut to clear the crap out of the threads then used a 1/2" compression straight fitting to join back up-the fitting was rated at 200p.s.i., more than adequate. Don't forget what I said about the port on the front cover not having much meat around it-will break if you are too heavy handed when tightening
 
Back
Top