Alloy corrosion

Just posted a question on the search facility, then realised the thread was over 3 years old

Following the advice 'rub down to shiny metal, wash down & apply etch primer immediately or within minutes' I'm assuming the the area to be treated needs to be dry prior to the primer being applied ?

Probably a silly question, but worth asking

Use 'panel wipe' to go over the sanded area, not water.
Wipe on, wipe off.
Apply etch primer.

Ratae said:

Use 'panel wipe' to go over the sanded area, not water.
Wipe on, wipe off.
Apply etch primer.

Click to expand...

Many thanks, glad I asked !