air suspension

S

stephen powell

New Member

Posts

2

• Oct 28, 2010

• #1

hi there
can any of you guys tell me witch wire go to witch pins on the air suspension level sensor on a td5 its the one on the right rear

the guy who had it before me cut the plug off the end and solderd the wires direct to the sensor but over time two have broken off
thanks
steve

 

R

robgeev

New Member

Posts

35

Location

Derby

• Oct 29, 2010

• #2

Probably doesn'T matter, variable resistor. Essentially if it sits on the ****, swap them over!

 

sierrafery

Well-Known Member

Posts

17,911

Location

Arad/Romania

• Oct 29, 2010

• #3

stephen powell said:

hi there
can any of you guys tell me witch wire go to witch pins on the air suspension level sensor on a td5 its the one on the right rear

the guy who had it before me cut the plug off the end and solderd the wires direct to the sensor but over time two have broken off
thanks
steve

Click to expand...

It's not a horse of the same colour believe me, here is from RAVE i hope u'll manage with this:

RH Height sensor
• Power supply output from SLABS ECU pin C0654-4 on an SG wire to RH
height sensor pin C0763-5.
• Earth output from SLABS ECU pin C0654-5 on an SO wire to RH height
sensor pin C0763-1.
• Signal input from RH height sensor pin C0763-4 on an SB wire to SLABS
ECU pin C0654-6.

I prefer to put it this way coz i dont wanna mislead u with my poor english.

 

Last edited: Oct 29, 2010

S

stephen powell

New Member

Posts

2

• Oct 30, 2010

• #4

thanks for your help guys

 

disco2shaun

New Member

Posts

1,137

Location

In the coldest caravan in Doncaster!

• Oct 30, 2010

• #5

wot it be same as other side?