Disco 1 93' 200tdi Exhaust Fixings

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Posts
56
Location
West Sussex
Hello,
I have acquired a replacement centre pipe which has bolt together fixings at either end but the 200tdi tail pipes seem to have the push and clamp fixing and also the 300tdi tail pipes unless the pictures on the websites are tosh. I'm confused as to which tail I actually need to fit the pipe I have?

Thanks
Steve
 
Both the 200 and 300 series exhaust systems was joined together with flanges when they left the factory so never a push fit.
The 200 was in two parts from the exhaust down pipe, the 300 was a one piece.
So it seems your system is a bit of 'aftermarket mix and match' and the simplest thing to do now is to fit a push fit centre pipe, unless you wish to replace the tail section, then go and get one with a joining flange which is the better option when it comes to separate the pipe if required in the future.
 
Hi Discool, Thanks for the info. Yes I need to replace the centre and tail pipe, so as my new strait through centre pipe has a flange fit I will just phone a few sites to make sure the new tail pipe has a flange too.

Cheers.
 
Back
Top