90 diesel fuel feed pipe
- Thread starter landowner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Flossie
Well-Known Member
- Posts
- 11,051
- Location
- Shropshire
Flow is 10mm od 8mm id
Return is 8mm od 6 mm id.
Return is 8mm od 6 mm id.
Flossie
Well-Known Member
- Posts
- 11,051
- Location
- Shropshire
That's on up to 300tdi, don't know td5 onwards.
Flossie
Well-Known Member
- Posts
- 11,051
- Location
- Shropshire
Same as mine then.
You can use brass compression fittings on the pipes if that helps the installation and extend the pipes if needed with nylon air tube which is the same size.
I've replaced mine with clear so I can see air engress etc.
You can use brass compression fittings on the pipes if that helps the installation and extend the pipes if needed with nylon air tube which is the same size.
I've replaced mine with clear so I can see air engress etc.
What type of clear tube have you used? The ones I found when I had my air leak were not suitable for diesel. I used them anyway in the short term.
You wnant nlyon air pipe as used in industry, its not totally clear more opaque but you can see air bubbles.
That was the only type I could find when I looked last year. I wasn’t convinced it would work that well. I may get a roll for the rebuild, perfect time to do it.
Flossie
Well-Known Member
- Posts
- 11,051
- Location
- Shropshire
Yes, nylon air tube.
Mines been on around 14yrs.
Mines been on around 14yrs.
Gmacz
Well-Known Member
- Posts
- 968
- Location
- Forfar/Dundee
Is it one of those Chinese diesel heaters with the little fuel tanks.
Around the £180 price range.
Around the £180 price range.
