big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
got some nice 60mm aircraft grade aluminium spacers to fit early defender,disco,rrc only used them for a week then took them off , £100 no offers need them gone.
60mm wheel spacers
- Thread starter big si
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
bump!
jonny mac
Active Member
- Posts
- 239
- Location
- north wales
Is it 60mm overall track or 60mm per side? Also are they a decent set as I've heard on the cheap ones the threads can stretch
jonny mac
Active Member
- Posts
- 239
- Location
- north wales
Also why did you take them off?
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
They are 60mm each per side ,no make on them but appear to be well machined ,I bought them in error a while back on ebay ,I wanted smaller as i had a set of alloys I wanted to use as they had decent tyres on that wouldn't fit my modulars but after a couple of weeks I noticed the sidewalls were all cracking up at which point my brother donated the modulars and tyres from his disco to me so I removed them as the protrusion outside the arches would have been quite large with 265's on.
jonny mac
Active Member
- Posts
- 239
- Location
- north wales
I'll have em for a ton if you can deliver them and I can pay with PayPal? Also providing that they are hub centric and have all the nuts etc
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
I can't deliver em mate as i can barely afford to run my 90 local cos she's drinking like a fish that's why i'm selling stuff, they don't have the hubcentric lip on them mate so i'd say not .I will put some pictures on tomorrow mate as it's a right pain to get to them at the moment.
jonny mac
Active Member
- Posts
- 239
- Location
- north wales
Ok mate, get some pics on and we will try to sort something out. Cheers
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
will do .
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
big si
Well-Known Member
- Posts
- 4,651
- Location
- black country
now sold.
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
On a side note, you don't need hub centric when you run nuts.
The studs are fixed, and the nuts locate the wheels onto the studs. It's different with bolts because the whole bolts can wobble around on the threads basically.
Ok ok I wouldn't advise doing 120mph+ without spigots, but on a land rover the PCD is so big and the studs and so hefty it isn't actually a necessity.
Cheers.
The studs are fixed, and the nuts locate the wheels onto the studs. It's different with bolts because the whole bolts can wobble around on the threads basically.
Ok ok I wouldn't advise doing 120mph+ without spigots, but on a land rover the PCD is so big and the studs and so hefty it isn't actually a necessity.
Cheers.
biggeeeee
Retired - Living the dream
- Posts
- 11,090
- Location
- Lanarkshire or Argyll
Check the thread date, they were put up for sale in 2012, good chance the spacers have been recycled and now contain some sort of soft drink :crazy:
Similar threads
Discovery Sport
LR DS and Ghost 2
