300TDi SRS light

bigrichsri · May 23, 2010

I took the clocks out of my 300 a couple of weeks ago as some of the bulbs had gone. Now the SRS light is constantly on. Is this normal or have I dislodged some wiring? Also, does it have to be plugged on the clear and roughly how much if so?

Cheers

sierrafery · May 23, 2010

bigrichsri said:
.......Now the SRS light is constantly on. Is this normal or have I dislodged some wiring? .......Cheers

It's not normal.......if nothing else helpes u must plug it in tester

gR@HaM · May 23, 2010

SRS light is constantly on mine after temporarily disconnecting both front knock sensor plugs to do some chopping & welding. Have also had to use EKA code a few times.

Sorry no hijack - can you buy a hand held code reader for D1s? I have OBD one for the alfa but pretty sure the disco doesn't use same plug..

sierrafery · May 23, 2010

gR@HaM said:
- can you buy a hand held code reader for D1s? I have OBD one for the alfa but pretty sure the disco doesn't use same plug..

Not the plug is the problem...the software used by LR which is not compatible with normal OBD reader.

Hawkeye works fine and it's not just a simple code reader but it isnt cheap as the chinese things.

gR@HaM · May 23, 2010

Thanks, sounds expensive tbh I might just remove the bulb

300TDi SRS light

bigrichsri

Active Member

sierrafery

Well-Known Member

gR@HaM

Well-Known Member

sierrafery

Well-Known Member

gR@HaM

Well-Known Member

Similar threads