Hi all, as some may know I have tinkered for years on a disco project but I have now moved area from where it’s stored and I simply don’t have the time to continue working on it. I don’t want to bring it home as I’m doing up my house and it’s another job to do in amidst the rest.
The disco is very much in bits, but rollable. It has all drivetrain mechanical bits fitted still, I did split engine to do HG snd also cleaned the head up with new valve stem seals.
Loads of welding done and a full froggats inner wing will be included.
300 quid if taken in the next fortnight.
vehicle is currently full with spares and parts.
collection from Box, Wiltshire.
Keys and v5 are present
The disco is very much in bits, but rollable. It has all drivetrain mechanical bits fitted still, I did split engine to do HG snd also cleaned the head up with new valve stem seals.
Loads of welding done and a full froggats inner wing will be included.
- volvo seats in truck ready to be mounted to rails
- Loads of bits/spares but no guarantee all pieces are there
- New rear crossmember
- Lots of chassis and body welding done
- New cleaned up a frame mount including bushes
- Rear axle rebuilt and not used - just been sat.
- 300tdi non edc engine
300 quid if taken in the next fortnight.
vehicle is currently full with spares and parts.
collection from Box, Wiltshire.
Keys and v5 are present
.
