300tdi boss kit

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

adam300tdi

Active Member
Posts
639
been looking for a boss kit to fit a mountney steering wheel.emailed devon 4x4 nd they sent me an email back of what i need it.the boss was £108!!! plus the spline they said it would be id never heard any 1 else talking about.been looking and its either 29spline or 36 spline.the 1 they showed was 14mm fine spline?
 
been looking for a boss kit to fit a mountney steering wheel.emailed devon 4x4 nd they sent me an email back of what i need it.the boss was £108!!! plus the spline they said it would be id never heard any 1 else talking about.been looking and its either 29spline or 36 spline.the 1 they showed was 14mm fine spline?

Think Merlin motorsport do one for about 30/40 quid 36 spline
 
i think ive found 1 on rimmerbros or somethin bout the same price.is it a 36 spline on a 300tdi disco then? but to honest i think im just guna take my old wheel off and check first neway
 
i think ive found 1 on rimmerbros or somethin bout the same price.is it a 36 spline on a 300tdi disco then? but to honest i think im just guna take my old wheel off and check first neway

If its a Disco 1 300tdi then lets know haw many spines cause I want to do mine;)
 
Some of the earlier disco 300tdi's use 29 splines, mine (P Reg) has 36, but i think there are some with 48 also. Best bet is probably to whip it off and take a look.
 
just taken my steering wheel off and its a 29 spline shaft.been reading on here that its quite hard to find a 29 spline boss kit to fit a mountney steering wheel
 
Back
Top