3 branches of wiring loom

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Normandy mud

New Member
Posts
2
Location
Normandy
Can anyone help with a wiring issue, I have part of the loom splits into 3 ways. one element goes to the hand brake, one to the left hand side of the gearbox, leaving the 3rd element comprising of a red and grey wire plus a partner that is black. its these I need to connect. Thanks lads, all the best
 
Welcome:)

I am sorry all out of crystal ball readings today:D

Seriously you need to find the section in the main forum that matches you car and ask in there.
I could take a wild guess and say transfer box but not having a clue what you have makes it wild:D

J
 
Can anyone help with a wiring issue, I have part of the loom splits into 3 ways. one element goes to the hand brake, one to the left hand side of the gearbox, leaving the 3rd element comprising of a red and grey wire plus a partner that is black. its these I need to connect. Thanks lads, all the best

And your problem is with a ....

iu


300TDi ...

But what is it in ?

Defender ?

Disco ?

Corsa ?

Slitty ?
 
Welcome to the forum
I7pha4t.jpg


This section is for introductions only. For technical help you should post your questions in the vehicle specific sections listed below, where owners of those vehicles will offer advice.

Main forum index:
https://www.landyzone.co.uk/forum

Freelander 1 and 2:
https://www.landyzone.co.uk/forum/land-rover-freelander.9

Defender, 90, 110, 130 (tratters)
https://www.landyzone.co.uk/forum/defender-90-110-130.7

Series 1, 2, 3 (tratters)
https://www.landyzone.co.uk/forum/series-land-rovers.6

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10
 
Back
Top