200TDi fan shroud

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Mr S1

Mr S1

Well-Known Member
Posts
3,364
Location
Surrey / Sussex borders
Advice please kind sirs !

Went to the outlaws this morning in the Defender to help her dad cut some metal up, so took my air saw and compressor. On the way back this awful screeching noise appeared, which I soon deduced was the fan catching the cowling somewhere. Fan blades undamaged, but rather than have issue I took the air saw to the cowling and cut it off, then drove home.

Do I need to replace it ? I did notice the temperature gauge did go up a bit quicker (presumably where the fan wasn't channeling air directly to the radiator ?)

Thanks in advance for any input :D
 
Mr S1 said:
Advice please kind sirs !

Went to the outlaws this morning in the Defender to help her dad cut some metal up, so took my air saw and compressor. On the way back this awful screeching noise appeared, which I soon deduced was the fan catching the cowling somewhere. Fan blades undamaged, but rather than have issue I took the air saw to the cowling and cut it off, then drove home.

Do I need to replace it ? I did notice the temperature gauge did go up a bit quicker (presumably where the fan wasn't channeling air directly to the radiator ?)

Thanks in advance for any input :D
Click to expand...
you could manage without it,but on a hot day stuck or slow moving it would be better replaced, why was it catching might want looking at
 
It may have moved a bit, fan itself is fine with the only movement being circular but I didn't have anything with me other than the air saw to sort out !

OK, I'll get another !
 
oh i see, lol , no probs can easily help u get this all done the weekend

would someone be so kind to tell me what the wiring is please, or does it come with the kit complete

can't remember if it had its own built in thermostat and just needs a pos and neg connections

don't worry @Mr S1 will find a nice little job for u on the D3 :p:D
 
neilly said:
I Like the way they emphasize no leaks for the control unit...............LOL
Do not forget the coolant when you do it guys, Have fun.


Cheers
Click to expand...

thks, daft question , if i have to extend any wires what's the amp sized cable i need please

got plenty of terminal connectors , crimps etc and automotive cable, along with heat shrink, soldering iron etc , so should be fine

put in all new antifreeze when we replaced the rad a few weeks back, so can resuse that , also got an antifreeze tester to ensure the mixture is ok
 
Mr S1 said:
What do you mean @neilly ?
Click to expand...

Supplied in this kit is one of Revotec's most prestige products - our, Variable Electronic Fan Controller. This is a machined aluminium body with sealed electronics. Variable thermostatic control from 70°C to 120°C. This product is highly regarded as the best available on the current market. With no leaking.

We combine the latest waterproof fan and controller technology used together for the ultimate cooling package.

This kit is engineered to fit without any permanent modifications to your vehicle.

Supplied complete with all necessary fittings and fixings to complete an electronic fan conversion on your Land Rover Defender/Discovery 200/300Tdi.

Each Kit Contains:
A Revotec Variable Temperature controller. Recognised as the best available on the current market
Variable from 70-120°C,Instant response, Minimal Obstruction to water flow. No Leaks.
A High Power COMEX (Italian Made) Fan which is: Waterproof to IP68, Bearinged, Balanced and rated to operate 24hours.
A set of Laser cut engineered brackets and all necessary fittings for a professional installation.
Brand Revotec
OEM / Aftermarket Aftermarket
Warranty 12 Months Warranty
Lead Time Stock Item - usually ready for despatch
Part Number B-LRD-TDI
Vehicle For Defender, Discovery 1

How are you going to set the switch on temperature?
Does look a nice piece of kit.

Cheers
 
neilly said:
Supplied in this kit is one of Revotec's most prestige products - our, Variable Electronic Fan Controller. This is a machined aluminium body with sealed electronics. Variable thermostatic control from 70°C to 120°C. This product is highly regarded as the best available on the current market. With no leaking.

We combine the latest waterproof fan and controller technology used together for the ultimate cooling package.

This kit is engineered to fit without any permanent modifications to your vehicle.

Supplied complete with all necessary fittings and fixings to complete an electronic fan conversion on your Land Rover Defender/Discovery 200/300Tdi.

Each Kit Contains:
A Revotec Variable Temperature controller. Recognised as the best available on the current market
Variable from 70-120°C,Instant response, Minimal Obstruction to water flow. No Leaks.
A High Power COMEX (Italian Made) Fan which is: Waterproof to IP68, Bearinged, Balanced and rated to operate 24hours.
A set of Laser cut engineered brackets and all necessary fittings for a professional installation.
Brand Revotec
OEM / Aftermarket Aftermarket
Warranty 12 Months Warranty
Lead Time Stock Item - usually ready for despatch
Part Number B-LRD-TDI
Vehicle For Defender, Discovery 1

How are you going to set the switch on temperature?
Does look a nice piece of kit.

Cheers
Click to expand...

was going to use an infrared thermometer on it before the fan is removed to give me a guideline of the temp , so can the set it up on the electric fan ,
 
You must log in or register to reply here.

Similar threads

O
Defender running a disco 200tdi - fan shrouding
Replies
9
Views
868
300bhp/ton
300bhp/ton
A
Blower fan Disco sport 2019/model L550
Replies
0
Views
252
Anan
A
E
Heater fan
Replies
7
Views
1K
mystery
mystery
T
200tdi temp gauge woes
Replies
16
Views
2K
Seaswood
Seaswood
B
Blower / Heater Motor squeak-Hum at slow speeds.
Replies
7
Views
527
JohnKeane
J
Back
Top