200 turbo problmes

Discoandy · May 14, 2009

Im getting a rather horrible noise when the turbo kicks in, it sounds as if the bearings have gone in the turbo unit.
I have given the vain's a wobble and there is a little play but not a lot.
It sound kind of like the barings are dry, but as far as i can tell there is fresh oil at the oil feed pipe.....I'm now a bit stuck at what to do next.

Now should there be any movement, or am i right in thinking its on its way out?

Can i change the barings?

Is a the disco unit similar enough to put on my defender manifold?

boydy1989 · May 14, 2009

the disco unit will not line up with the exhaust.

There should be some play, but a miniscule amount - like a barely feelable click when wobbled.

They aint too hard to do - look

One Laugh Have It! The land Rover Forum To Be On

(I realise this is a 300 one, but i changed it - took no time.)

Hope this helps.

Oh yeah, i paid £50 for my replacement off ebay, bargain. LOADS more power an all, cos it was workin propper!

Tig9619 · May 15, 2009

if its making a noise as if its about to die, do not use your vehicle as you run risk of the turbo breaking up if the compressor wheel starts hitting the casing, thus knackering your engine if it ingests the bits!

HOOK · May 16, 2009

surely as its a 200 tdi then the intercooler should stop it ingesting any bits. but there is the possibility of oil contamination via the turbo return pipe

boydy1989 · May 16, 2009

yeah mine contaminated the oil. Bastid poxy tiny piece of swarf jammed the oil pressure releif valve had to take the sump off to get it out.

Mine had impacted the casing a few times too, but i appear to have got away with it.

200 turbo problmes

Discoandy

New Member

boydy1989

Well-Known Member

Tig9619

Active Member

HOOK

New Member

boydy1989

Well-Known Member

Similar threads