200/300tdi, TD5 bonnet liner kit ...

The Defender Bonnet kit will comprise:

1 off 150cm x 100cm x 7mm thick Dodo Bonnet liner <Dodo Bonnet Liner – Sound Deadening Shop>
2 off DoDo mat, silver, DEADN hex sheet <Dodo Mat DEADN Hex Sheet – Sound Deadening Shop>
1 off 12' foot roll of Aluminium Finishing Tape <Aluminium Finishing Tape – Sound Deadening Shop>

All Dodo (The Sound Deadening Shop) products, designed to fit as per <https://www.landyzone.co.uk/land-rover/d90-300tdi-bonnet-insulation-installation.367501/>

I accept PayPal, bank transfer or cash on collection and can provide a VAT receipt (if requested).
Price includes UK delivery (MyHermes).

Note this is a specific kit to fit the Land Rover Defender 200, 300 and TD5 'old shape' bonnet, as fitted to the Defender 90, 110 or 130 models.
By 'specific' I mean that it's wide enough to go from edge to edge of the bonnet which the kit sold by The Sound Deadening Shop doesn't (it's not wide enough).
The kit includes the two sound deadening pads required to go between the center strengthening ribs, which takes the 'twang' out of the bonnet and also provides a smaller step for the bonnet liner to flow over.
The kit is made up of products from the Sound Deadening Shop (Dodo Mat)

If you are a member of this group please PM me for a price. If you are reading this and are not a member, join the group, introduce yourself and then PM me.

Or buy the kit on eBay.
eBay price will be £38.99 + £4.50 shipping

40 quid for some tin foil? At least Dick Turpin wore a mask

the_wolf said:

40 quid for some tin foil? At least Dick Turpin wore a mask

Click to expand...

DoH rumbled ..... Hi-Yo Silver ... (no wait, that was the Lone Ranger) .... anyway i've never shot a chicken in the street.
Is this more to your liking ? Dynamat bonnet sound proofing/ deadening kit Fit Land Rover Defender 200/300 TDI (lucari-solutions.co.uk)
Or one of these ? LAND ROVER DEFENDER 1987-2006 -90/110/130 BONNET INSULATION PAD. PART- AWR4147 | eBay

Right.
We are ready to rumble ...

Here is the kit you get for £38.99 (with free shipping if you are a member here)...
150 x 100 x 0.7cm sticky backed mat.
2 sheets Dodo mat
1 x length Aluminium Foil Finishing tape.
1 length thick foil tape to cover the holes in the 2 ribs




In addition you will need a pair of scrissors, a felt pen and some bralke cleaner (IPA).
The brake cleaner/IPA is used to clean the surface before you stick the insulation and tape on.

The bonnet itself needs to be clean and rust free see here for pictorial insytructions. https://www.landyzone.co.uk/land-rover/d90-300tdi-bonnet-insulation-installation.367501/