110 Door pillars

Forsaken1 · Mar 12, 2009

Thought I'd throw this one out before I start tinkering, recently bought my 110 *Landie newbie* and the door pillars under the windscreen are rusted through offside worse than nearside.

My question is this........... can I just buy and fit the sections that are gone or do I have to fabricate them myself?

Cheers

Damien

discomania · Mar 12, 2009

You can buy new door pillars and weld them in.

JC238 DOOR PILLAR R/H 1958 ON INC 90/110

£39.

tankduck · Mar 12, 2009

Has someone got a diagram or something that lists all the parts for defenders and gives the part number? And is there anywhere on the net that literally does all the panels? For example I haven't found anyone that sells hardtop van panels, or another one that I'm after is the body panel that the rear fog mounts to, its only a small panel, but mine is shagged.

Cheers

Kris

Forsaken1 · Mar 12, 2009

tankduck said:
~snip~ Has someone got a diagram or something that lists all the parts for defenders and gives the part number? And is there anywhere on the net that literally does all the panels?
Kris

Now theres a grand question, would make life a little easier if someone did have this.

Damien

Forsaken1 · Mar 12, 2009

discomania said:
You can buy new door pillars and weld them in.

JC238 DOOR PILLAR R/H 1958 ON INC 90/110

£39.

Thnaks for this.

tankduck · Mar 12, 2009

Only thought as most places seem to do the basic panels, but am struggling to find somewhere that does all parts. I also have a classic mini and the parts for that are so easy to source, you can literally buy any panel from most places.

discomania · Mar 12, 2009

Yes there is a LR parts catalogue.

I have it here, I would send it to you but the files are too big.

I will arrange to get it hosted on a webserver for a while and you can download it.

oil dripper · Mar 12, 2009

dunt bearmach do a pdf catologue?

http://www.bearmach.com/partscatalogues/Defender_fastparts_A4_lo.pdf

found it,anygood to you?

Forsaken1 · Mar 12, 2009

oil dripper said:
dunt bearmach do a pdf catologue?

http://www.bearmach.com/partscatalogues/Defender_fastparts_A4_lo.pdf

found it,anygood to you?

Bloody brilliant!

Thank you!

tankduck · Mar 12, 2009

Thats pretty spot on, but doesn't have all panels does it? Are either of the panels I mentionned in there or am I blind

Oil Dripper, if its not over 100mb (and loads of people don't wanna download it) you could use yousendit and post the address up here.

oil dripper · Mar 12, 2009

tankduck said:
Thats pretty spot on, but doesn't have all panels does it? Are either of the panels I mentionned in there or am I blind

Oil Dripper, if its not over 100mb (and loads of people don't wanna download it) you could use yousendit and post the address up here.

if you wanna buy a new roof side panel or rear panel why dunt you phone land rover up and ask, there common parts, im sure they sell loads everday

and if they dunt wanna download it why shud i be arsed to send it to everyfooker wen its freely available(see link) if they can be arsed to look :doh:

Forsaken1 · Mar 12, 2009

tankduck said:
Thats pretty spot on, but doesn't have all panels does it? Are either of the panels I mentionned in there or am I blind

It does the rear 1/4 panels, it's number 7 on the PDF. Not sure about the other.

Paul D · Mar 12, 2009

tankduck said:
Thats pretty spot on, but doesn't have all panels does it? Are either of the panels I mentionned in there or am I blind

Why not just phone the place up? Not all companies list all the products available in the catalogues ..

oil dripper · Mar 12, 2009

Forsaken1 said:
It does the rear 1/4 panels, it's number 7 on the PDF. Not sure about the other.

oh sorry you mean these panels
LR502R Rear quarter panel - RH (either side rear door)

LR502L Rear quarter panel - LH (either side rear door)

int google a great tool

Forsaken1 · Mar 12, 2009

oil dripper said:
oh sorry you mean these panels
LR502R Rear quarter panel - RH (either side rear door)

LR502L Rear quarter panel - LH (either side rear door)

int google a great tool

Is it now I should be a pain in the arris and ask about the support for the windscreen that holds the door pillars as that's the bit thats rusted through! ?

mysteryman · Mar 12, 2009

Do you mean the bulkhead? That supports the windscreen.

oil dripper · Mar 12, 2009

Forsaken1 said:
Is it now I should be a pain in the arris and ask about the support for the windscreen that holds the door pillars as that's the bit thats rusted through! ?

the bolty on bit on the back of the windscreen hinge ? or the apost bit ?

Forsaken1 · Mar 12, 2009

mysteryman said:
Do you mean the bulkhead? That supports the windscreen.

Sorry did not know it was all one unit, its only rusted through where it connects to the door pillars, below the top hinges, do I have to rip out the whole bulkhead or is it ok to cut out and fabricate the rusted bits?

Forsaken1 · Mar 12, 2009

oil dripper said:
the bolty on bit on the back of the windscreen hinge ? or the apost bit ?

Its gone on both sides just under the top hinge on both doors. if that helps?

oil dripper · Mar 12, 2009

Upgraded Land Rover Bulkhead Repair Panel

Brand new 1.2mm thick repair panels for series 2 & 3 as well as Defenders.

Holes already in place for door hinge 2 round 1 square.

Upgraded to include extra metal underneath the window as you can see in the photo.

Made from mild steel, laser cut for precision. Ready to weld in place and can be easily trimmed to suit if required.

These are sold in pairs e.g left and right hand.

http://www.yrm-metal-solutions.com/index.htm

110 Door pillars

New Member

Well-Known Member

Active Member

New Member

New Member

Active Member

Well-Known Member

Well-Known Member

New Member

Active Member

Well-Known Member

New Member

Old, nackered 'n broke, but the Landy is fine . :)

Well-Known Member

New Member

New Member

Well-Known Member

New Member

New Member

Well-Known Member

Similar threads