101 carb adjustment

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Shippers

Well-Known Member
Posts
10,693
Location
Algarve
Hi All
Stripped cleaned and replaced o rings and gaskets on carbs,set up as manual but get misfire when air filter connected it's a new filter,have tried four or five times same result revs fine connect air pipes starts to misfire.
Any ideas cheers
 
Misfire?

I.e. One plug not sparking.


Are you touching a lead to earth with the air cleaner.
Thanks for reply
Went to fit electronic ignition yesterday it didn't fit so had to use old points reset them and misfire gone.
Bought electronic kit from craddocks couldn't get new points here but it doesn't fit distributor base plate
 
Back
Top