03 Discovery alarm goes off when locking with remote
- Thread starter ds2
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discool
Well-Known Member
- Posts
- 13,482
That points to an iffy ultrasonic sensor, as u know that item is isolated when locking with the key.
Looking at pictures it looks a straightforward thing to just swop the device:
http://img.auctiva.com/imgdata/1/7/7/9/5/4/1/webimg/677751642_o.jpg?nc=378
http://img.auctiva.com/imgdata/1/7/7/9/5/4/1/webimg/677751642_o.jpg?nc=378
discool
Well-Known Member
- Posts
- 13,482
Only by unclipping and pulling the plug one at a time, so just trial and error.
sierrafery
Well-Known Member
- Posts
- 17,085
- Location
- Arad/Romania
^^^ +1...or via nanocom or other proper tester... you can also disable the volumetric sensors this way
had this problem with mine due to a water leak from the sun roof.
removed the ultrasonic sensors and took them apart cleaned the circuit boards carefully with a toothbrusk to remove the corosion .reffitted and they worked
try its a free tip
regards
steve y
removed the ultrasonic sensors and took them apart cleaned the circuit boards carefully with a toothbrusk to remove the corosion .reffitted and they worked
try its a free tip
regards
steve y
